Optical Fiber Cable Splice closure/joint closure is a junction protection device that provides optical, sealing and mechanical strength continuity between adjacent optical cables.
In the optical communication network, due to the limited length of optical cable and the need for branching of optical cable on the transmission line, there are optical cable joints. The optical cable junction box provides conditions for the connection and branching of optical cable and protects the joints.
Optical cable junction box, also known as optical cable junction box, optical cable junction package, optical cable junction package and barrel, is mainly used for direct and branch connection of overhead, pipeline, direct burial and other laying methods of various structural optical cables.
The box is made of high quality engineering plastics, with high strength, corrosion resistance and aging resistance. It can withstand severe climate change and bad working environment. It is widely used in communication, network system, CATV cable television, optical cable network system and so on.
Inline Horizontal Fiber Optic Splice Closure , Outdoor Water Proof Fiber Joint Box 6~96Cores
Technical Parameter:
- Working Temperature: -40 degrees centigrade~+70 degrees centigrade
- Atmospheric Pressure: 70~150Kpa
- Axial Tension: >2000N/1min
- Stretching Resistance: 2500N/10 square centimetre(1min)
- Insulation resistance: >2*104MΩ
- Voltage Strength: 15KV/1min, no arcover or breakdown
- Pressure in the water: 50m/72hours
- Splice tray with optical taking-in radius≥40mm. Low optical loss
|
Model
|
HT2006H-101-12
|
|
Size
|
H280×W200×D90 mm
|
|
Ports
|
1 inlet port / 1 out port
|
|
Input and output cable quantity
|
2-4 fibers at one side
|
|
Installable cable diameter
|
Φ8mm~Φ20mm
|
|
Capacity
|
12 cores ×4=48 cores or 24 cores×4=96 cores(bundle)
|
|
Weight
|
1200-1500g
|
|
Packing Quantity
|
20 pcs / carton
|
|
Material
|
PC alloy
|
|
IP Rate
|
IP65
|
|
Installation Type
|
Overhead/wall-mount/pole holding
|
Main parts:
|
No.
|
Name
|
Quantity
|
Usage
|
Remark
|
|
1
|
Crust
|
1 set
|
Protecting fiber cable splices in whole
|
|
|
2
|
Fusion splice tray
|
Max.4 tray
|
Fix fiber, Protect heat-shrinkable tube Sleeve
|
|
|
3
|
Foundation
|
1 set
|
Fix cable,reinforced core and tray
|
|
|
4
|
Seal fitting
|
1 set
|
Air-proof between cover and bottom
|
|
|
5
|
Port plug
|
4 pieces
|
Sealing empty ports
|
|
|
6
|
Valve
|
1 set
|
Pressure measurement,inspection sealing
|
Configure by user
|
Accessories list:
|
No.
|
Name of accessories
|
Quantity
|
Usage
|
Remarks
|
|
1
|
Heat shrinkable tube
|
|
Protecting fiber splices
|
Configuration as per capacity
|
|
2
|
Nylon tie
|
|
Fixing fiber with protective coat
|
Configuration as per capacity
|
|
3
|
Insulation tape
|
1 roll
|
Enlarging diameter of fiber cable for easy fixing
|
|
|
4
|
Seal tape
|
1 roll
|
Enlarging diameter of fiber cable which fits in with seal fitting
|
Configuration as per specification
|
|
5
|
Hanging hook
|
1 set
|
For aerial use
|
|
|
6
|
Label tape
|
1 piece
|
Sign fiber
|
|
|
7
|
Spanner
|
1 piece
|
Install bolts of shell
|
|
|
8
|
Desiccant
|
1 bag
|
Desiccating air.
|
|
OEM/ODM Service:
If you want to display your own brand LOGO on the goods such as cable, package bag, label or any where. It is no any problem. Our OEM and ODM service is always ready to do it.
Packing:
According to Stardard Export Packing.
Carton box, wooden box, wooden pallet.
Shipping:
- International express such as Fedex, UPS, TNT, DHL, etc
- Internatioal air: CA, AA, EA, etc
- By sea
Tag:
fiber optic joint closure, fiber optic splice closure
適用于架空、直埋、管道敷設的光纜線路中直接和分歧接續(xù)
User's Guide for 1-in-1-out 6~ 96cores In-line/horizontal optical cable splice closure:
1.1 fiber preparation
1. Remove the outer skin of the optical cable (if any, please remove the shielding and armor) and then remove each wrapping layer until the loose sleeve is exposed. For the specific method, please follow the standard method recommended by the optical cable manufacturer. The preparation length is 3M.
2. Clean the loose sleeve and the reinforced core sheath with detergent, remove the redundant filled sleeve, and polish the outer skin of the optical cable 150 mm long with the provided sandpaper.
1.2 optical cable installation
1. Select the sealing ring with the minimum inner diameter according to the outer diameter of the optical cable, and put two sealing rings on the optical cable.
2. Put the optical cable into the corresponding hole.
3. Connect shielding and grounding.
4. Wrap the self-adhesive sealing tape between the two sealing rings so that the sealing tape is wound flush with the outer diameter of the sealing ring to form a sealing end of the optical cable.
5. Press the sealing end of the optical cable into the hole.
6. Use the hose hoop to pass through the cable reinforcement fixing base and cable core support, fix the cable on the connector box base, and tighten the screw of the hose hoop until the hose hoop is tightened.
7. Tie a nylon cable tie on the cable and cut the remaining length.
8. Please use plug to seal other unused optical cable holes. The plug is also wrapped with sealing tape.
9. Wrap the reinforcing member on the countersunk screw of the welding plate support and press it tightly.
1.3 optical fiber connection
1. Prepare 1.5 turns of optical fiber after hanging, and then coil all the remaining fibers in the box.
2. Single core buffer tube shall be used for single core fiber hanging and ribbon buffer tube shall be used for ribbon fiber hanging. Fasten with nylon tie at the inlet of the welding plate.
