|
Model
|
HT3348GIP-4TF
|
|
Interface Characteristics
|
|
Fixed Port
|
48*10/100/1000Base-T PoE
ports (Data/Power)
4*1/10G uplink SFP+ slot
ports (Data)
1 * console
port(115200,N,8,1)
|
|
Ethernet Port
|
10/100/1000Base-T,Auto-sensing,Full/half
duplex MDI/MDI-X self-adaption
|
|
SFP Slot Port
|
1/10G SFP+ optical fiber
interface, default matching optical modules (optional order single-mode /
multi-mode, single fiber / dual fiber optical module. LC)
|
|
Twisted Pair Transmission
|
10BASE-T: Cat3,4,5 UTP(≤100
meter)
100BASE-TX: Cat5 or later
UTP(≤100 meter)
1000BASE-T: Cat5e or later
UTP(≤100 meter)
|
|
Optical Cable
|
Multi mode: 850nm 0 ~ 500M,
single mode: 1310nm 0 ~
40KM, 1550nm/ 0 ~ 120KM.
|
|
Chip Parameter
|
|
Network Management Type
|
L2+
|
|
Network Protocol
|
IEEE802.3 10BASE-T;
IEEE802.3i 10Base-T;
IEEE802.3u 100Base-TX;
IEEE802.3ab 1000Base-T
IEEE802.3z 1000Base-X
IEEE802.3ae 10GBase-SR/LR
IEEE802.3x
|
|
Forwarding Mode
|
Store and Forward(Full Wire
Speed)
|
|
Switching Capacity
|
598Gbps
|
|
Forwarding
Rate@64byte
|
131Mpps
|
|
MAC
|
32K
|
|
Buffer Memory
|
32M
|
|
Jumbo Frame
|
9.6K
|
|
LED Indicator
|
Power:PWR
(yellow), System : SYS (yellow), Network: Link/Act (yellow); SFP:
L/A (green),PoE: PoE (green)
|
|
Reset Switch
|
Yes, One-button factory
reset
|
|
PoE & Power
|
|
PoE Port
|
Port 1 to port 48
|
|
PoE Management
|
Total power limit of PoE
power supply
PoE output power allocation,
off& af &at
PoE output priority
configuration
PoE working status
Delay start of power supply
Scheduling of PoE operation
and time
|
|
Power Supply Pin
|
Default: 1/2 (+), 3/6
(-)
|
|
Max Power Per Port
|
30W; IEEE802.3af/at
|
|
Total PWR / Input Voltage
|
600W (AC100-240V)
|
|
Power Consumption
|
Standby:<35W;Full load:<600W
|
|
Power Supply
|
Built-in power supply,
AC100~240V 50-60Hz 6.6A
|
|
Power Input Interface
|
Dual input power interface,
AC power supply priority,
support anti-reverse
protection, power-off automatic switching DC connection; 2 set DC12-48V input
interfaces; way alarm switch interface; 1 set of AC power input
interface
|
|
Physical Parameter
|
|
Operation TEMP / Humidity
|
-40~+80°C;5%~90% RH Non
condensing
|
|
Storage TEMP / Humidity
|
-40~+85°C;5%~95% RH Non
condensing
|
|
Dimension (L*W*H)
|
440*298*44.5mm
|
|
Net /Gross Weight
|
<5.0kg / <5.8kg
|
|
Installation
|
Desktop, 19 inch 1U cabinet
|
|
Certification & Warranty
|
|
Lightning protection /
protection level
|
Lightning protection: 6KV
8/20us; Protection level: IP30
IEC61000-4-2(ESD):±8kV
contact discharge,±15kV air discharge
IEC61000-4-3(RS):10V/m(80~1000MHz)
IEC61000-4-4(EFT): power
cable:±4kV; data cable:±2kV
IEC61000-4-5(Surge):power
cable:CM±4kV/DM±2kV; data cable:±4kV
IEC61000-4-6(radio frequency
transmission):10V(150kHz~80MHz)
IEC61000-4-8(power frequency
magnetic field):100A/m;1000A/m ,1s to 3s
IEC61000-4-9(pulsed magnet
field):1000A/m
IEC61000-4-10(damped
oscillation):30A/m 1MHz
IEC61000-4-12/18(shockwave):CM
2.5kV,DM 1kV
IEC61000-4-16(common-mode
transmission):30V; 300V,1s
FCC Part
15/CISPR22(EN55022):Class A
IEC61000-6-2(Common
Industrial Standard)
|
|
Mechanical Properties
|
IEC60068-2-6 (anti
vibration)
IEC60068-2-27 (anti shock)
IEC60068-2-32 (free fall)
|
|
Certification
|
CCC;CE mark, commercial; CE/LVD
EN60950;FCC Part 15 Class B; RoHS;
|
|
Warranty
|
5 years, lifelong
maintenance.
|
|
Network Management Features
|
|
Interface
|
IEEE802.3X (Full-duplex)
Broadcast storm control
based on port speed
The speed limit of the
message flow in the access port. The minimum particle size is 64Kbps.
Port temperature protection
setting
Port green Ethernet
Energy-saving setting
|
|
Layer 3 Features
|
L2+ Network management
IPV4/IPV6 management
L3 soft routing
forwarding,
Static route, Default
route @ 128 pcs, APR @ 1024 pcs
|
|
VLAN
|
4K VLAN based on port,
IEEE802.1q
VLAN based on the protocol
VLAN based on MAC
Voice VLAN, QinQ
configuration
Port configuration of
Access, Trunk, Hybrid
|
|
Port Aggregation
|
LACP, Static aggregation
Max 26 aggregation groups
and 8 ports per group.
|
|
Spanning Tree
|
STP (IEEE802.1d),RSTP (IEEE802.1w),MSTP (IEEE802.1s)
|
|
Industrial Ring Network
Protocol
|
G.8032 (ERPS),Recovery time
less than 20ms
255 Ring at most, Max 254
devices per ring.
|
|
Multicast
|
IGMP Snooping
v1/v2, Max 1024 multicast groups, Fast log out
MLD Snooping
v1/v2,Multicast VLAN
|
|
Port Mirroring
|
Bidirectional data mirroring
based on port
|
|
QoS
|
Diff-Serv QoS,Priority
Mark/Remark
8*Output queues of each port
802.1p/DSCP priority mapping
Queue Scheduling Algorithm
(SP, WRR, SP+WRR)
Flow-based Packet Filtering
Flow-based Redirection
Flow-based Rate Limiting
|
|
ACL
|
L2 to L4 packet filtering,
matching first 80 bytes message. Provide ACL based on MAC, Destination MAC
address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP
Port Range, and VLAN, etc. Port-based Issuing ACL.
ACL based on port and VLAN
|
|
Security
|
User hierarchical management
and password protection
SSH 2.0,SSL,Port
isolation,ARP message speed limit
Broadcast storm
control,Backup for host datum
IEEE802.1X & MAC address
authentication
Mac black holes,IP source
protection
AAA & RADIUS,MAC learning
limit
ARP inspection,Anti-DoS
attack
IP-MAC-VLAN-Port binding
|
|
DHCP
|
DHCP Client,DHCP
Snooping,DHCP Server,DHCP Relay
|
|
Management
|
Console/AUX
Modem/Telnet/SSH2.0 CLI
Web Management (HTTPS),Cable
Diagnose,LLDP
Download & Management on
FTP, TFTP, Xmodem, SFTP
SNMP V1/V2C/V3,One-key
recovery
NTP,System work log,Ping
Test
CPU instant utilization
status view
ONV NMS - Smart Network
Management System Platform (LLDP+SNMP)
|
|
System
|
Web browser: Mozilla Firefox
2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet
Explorer10 or later;
Category 5 Ethernet network
cable
TCP/IP, network adapter, and
network operating system (such as Microsoft Windows, Linux, or Mac OS X)
installed on each computer in a network
|
